|
|
Lab Equipment
| IPC-0572-P | Mass Dual Regulated PSU | Description - Mass Dual Regulated PSU. Part Number - IPC-0572-P. Electrical Supply - 220-240V a.c. 50-60Hz. Dimensions - 179x190x85mm overall 2.3kg.
Designed for use with electronic modules, transistors, amplifiers etc where the current required is not more than 1A. Ripple typically less than 50mV. Output up to 15V d.c. positive and negative (with respect to zero) in 5 stepped ranges: 5, 6, 9, 12 and 15V. The outputs are from three 4mm sockets: positive, zero and negative, colour coded red, blue and black respectively. The outputs are switched by means of a rotating knob. Overload and short circuit protection is built in. An illuminated on/off switch is mounted on the rear panel adjacent to a fused appliance inlet. Housed in a robust metal case with a durable powder coated finish.
[More Information...] | £ |
| IPC-0234-P | Mass Lovolt Power Supply | Description - Mass Lovolt Power Supply. Part Number - IPC-0234-P. Electrical Supply - Mass Lovolt Power Supply. Dimensions - 179x190x85mm overall 2.8kg.
Voltage 2, 4, 6, 9, 12 or 14V a.c. or unsmoothed d.c. at 4A continuously, or up to 5A for periods of 1 hour. Voltages are selected by means of a rotating switch on the front panel. In any incidence of overload, including direct short, a current sensing circuit breaker mounted on the front panel will operate and disconnect the output voltage. Outputs are taken from colour coded 4mm sockets mounted on the front panel. An illuminated on/off switch is mounted on the rear panel adjacent to a fused appliance inlet. Housed in a robust metal case with a durable powder coated finish. Supplied with mains lead and instructions
[More Information...] | £ |
| IPC-0201-P | Mass Single Regulated PSU | Description - Mass Single Regulated PSU. Part Number - IPC-0201-P. Electrical Supply - 220-240V a.c. 50-60Hz. Dimensions - 150x100x80mm overall 0.85kg.
Single rail regulated supply providing a smoothed and regulated d.c. output over four ranges, selected by a rotary switch. Housed in a robust ABS plastic case. Ideally suited for electronics work. Output is via 4mm red and black sockets. Voltage outputs 5, 9, 12 and 15V at up to 600mA maximum current.
[More Information...] | £ |
| IPC-0484-P | Multitap Transformer | Description - Mass Multitap Transformer, Part Number: IPC-0484-P, Electrical Supply: 220-240V a.c. 50-60Hz, Dimensions: 179x190x85mm overall 3.3kg. Outputs tapped at 0, 2, 3, 8 and 12V a.c. at currents up to 6A continuous or 8A for periods of up to 1 hour. Output is from 4mm sockets radially spaced from a central common socket. Voltage outputs of 1, 2, 3, 4, 5, 6, 9, 10, and 12V a.c. can be selected by choice of sockets. An illuminated on/off switch is mounted on the rear panel adjacent to a fused appliance inlet. Housed in a robust metal case with a durable powder coated finish.
[More Information...] | £ |
|
